Dog Training Collar Dog Remote Rechargeable Waterproof Bark Collar with 3 Training Modes for Pet Dogs
Feature:
1. Two functions of dog training and barking control, one key switch (3 seconds) for dog training and barking control function, convenient operation.
2. Approx. 1000 meters/ 39370in remote control distance. Remote design, easy and effective dog training.
3. The dog training receiver is small and exquisite, the product has buzzer, vibration, flashlight, powerful function, simple operation, effective dog training.
4. The dog training collar has 3 training modes, gear adjuster, which can adjust the static electricity and vibration of the receiver, correct the dog's bad habits.
5. Waterproof grade IPX7, you are not afraid to play in the rain, large capacity lithium battery, long standby time Receiver: 650mAh, transmitter: 300mAh.
Specification:
Item Type: Dog Training Collar
Material: ABS
Receiver Size: Approx. 6x3.5x2.5cm/2.3x1.38x0.98in
Collar: Approx. 70cm/27.55in Long (Can be Trimmed)
Transmitter Battery Capacity: 300mAh (Built in Battery Shipped)
Battery Type: Lithium Battery
Receiver Battery Capacity: 650mAh (Built in Battery Shipped)
Receiver Waterproof Rating: IPX7
Remote Control Standby: 180 Days
Receiver: 25-40 Days
(The Above Standby Time Depends on Actual Usage)
Package List:
1 x Receiver
1 x Transmitter
1 x Collar
4 x Pin Nails
4 x Silicone Screw
2 x Shockproof Mat
1 x Test Lamp
1 x English Manual
1 x Charging Cable
1 x Lanyard
Note:
Tips
1. Please read and follow the instructions in this manual. It is important to wear the collar correctly. When pets wear collars that are too long or too tight, they can cause skin damage. Wearing too long or too tight may cause stress and cause skin damage. This is often mistaken for burns.
2. Don't tie the device tightly around the dog's neck.
3. Do not leave the device on the dog for more than 12 hours.
4. Replace the collar on the pet's neck every 1 or 2 hours. 5. The use range is within 1000m.
Please Allow Approx. 1‑2cm/0.4‑0.8in Error for Manual Measurement.
How to remote transmitter and receiver
1. Turn on the remote control transmitter and press the CH key to select the signal channel to be used.
2. Press and hold the power button on the receiver for 2 seconds, at this time the indicator light keeps flashing. Press one of the function buttons such as tone, vibration, or static on the remote control to pair.
3. If you do not press the function key within 10 seconds, please re‑pair.
4. If there are multiple receivers, you can select the same signal channel or another channel for pairing.
How to use:
Instructions:
Charge the remote transmitter
1. Connect the charger cable to the charging port.
2. Plug the charger into a standard socket.
3. The battery icon will flash during the charging process, and it will become hard after the charging is completed.
Responsible recipient
1. Open the rubber cover and connect the receiver and charger to a standard socket.
2. The red indicator light flashes slowly while charging, the red indicator light is always on after charging is completed
Turn the receiver on and off
1. Turn on: Press the power button once, the handset will emit a short "beep" sound, indicating that the handset is turned on.
2. Shut down: Press the power button once, the handset will beep for a long time, and the indicator will no longer flash.
The correct wearing posture contributes to healthy and effective dog training
1. The receiver should be placed at the bottom of the dog’s neck, and the nut must directly touch the dog’s skin.
2. If your dog has thicker neck hair, use a longer screw .
3. Anti‑vibration pad can prevent skin abrasion. It is recommended to use 2‑3 times a week.
4. The distance between the receiving collar and the dog’s neck should be kept at the finger distance, not too loose, otherwise it will seriously affect the static shock effect.
5. The extra part of the belt can be trimmed or treated by other methods.