Features:
* Multiple positioning modes: GPS + AGPS + Wifi + Beidou + LBS
* Global GSM+GPRS four-band system: 850/900/1800/1900MHz
* Location query: the user's specific location can be queried through a mobile phone or computer
* Electronic fence: delineate an area on the map with the device as the center, and alarm immediately when the area is out
* Historical trajectory: query the equipment running trajectory within three months anytime, anywhere
* Remote shutdown: the device shutdown function can be realized through the guardian's mobile APP
*Remote restart: the device restart function can be realized through the guardian's mobile APP
* Smart power saving: turn off/on GPS and data upload within the time frame
* Mobile client/GZH/computer service platform, multiple control methods
2. Client operation instructions
2.1 APP login
1. You need to log in manually through the device IMEI and the default password 123456
Function Description:
2. Information: After various alarms of the device, the client will receive the alarm push, and you can enter the information to view the content.
3. Location: View the location of the device in real time. The map interface can display the location of the device, and the upload interval is 10 minutes by default.
When the icon is base station positioning, it is GPS positioning
4. Track: You can check the track in the past 3 months (the green route is GPS and the blue route is LBS)
5. Security range: 3 sections of security range can be set, the minimum ra dius of the fence is 100 meters, when the user goes from the fence to the outside of the fence, the corresponding name range alarm will be generated.
6. Attendance: A prompt will be issued when entering or leaving the location set on the map or the WIFI SSID within the set time period
7. Power saving: you can choose to turn on/off GPS positioning, and turn off uploading data at a specified time
8.Remote restart: when the device is found to be abnormal, the device can be restarted
9. Remote shutdown: Terminating the equipment can also be remotely shut down
10. Settings: Set up each item of the device.
3. Equipment related instructions
3.1 Button
1. Long press for 3 seconds to power on, short press to power off without a card, and long press for 8-9 seconds to power off after installing a card
2. If no card is installed, press and hold for 3 seconds to shut down
3.2 Factory password
Edit the SMS "pwrst" and send it to the device number to restore the factory password. Reply to the text message "Password cleared successfully"
3.3 Restore factory
Edit the text message "1122" and send it to the device number, the device will automatically restart and reply the text message "factory setting successful"
3.4 Query IMEI
Edit the SMS "imei#" and send it to the device number, and reply to the SMS IMEI number (200000000000001)
3.5 Modify IMEI
Edit the SMS "imei#+effective imei number" (IMEI#200000000000001) and send it to the device number, and reply to the SMS "Setup successful"
3.6 Led lamp settings
Edit the text message "led#on/led#off" and send it to the device number, turn on the led light/turn off the led light
3.7 Modify the positioning upload interval
Edit the SMS "time#+number" (time#1 can be set to 1-60 minutes) and send it to the device number, and reply to the SMS "time#+number"
3.8 IP modification
Edit the SMS "DOMAIN#domain name or IP#port number#" and send it to the device number, and reply to the SMS "DOMAIN#domain name or IP#port number#"
3.9 Automatic boot
The device is in low-power shutdown state, and it can be automatically turned on when the power supply reaches 3.7V
4. Troubleshooting
The device cannot connect to the server when it is turned on for the first time, and the app sends a command to indicate that the device is not connected to the Internet. Please check:
1) Is the SIM in the device connected to a gsm network? For example, Telecom does not support it.
2) Whether the SIM card in the device is enabled for data flow, it must be compatible with 2g data flow, and the device can only use 2g data flow at present.
4) Whether the IMEI is correct, it must be ensured that the IMEI barcode affixed on the device is consistent with the IMEI written in the factory
Specification:
Name: Smart Pet Bell
Material: ABS
Multiple positioning modes: GPS + AGPS + Wifi + Beidou + LBS
Universal GSM+GPRS quad-band system: 850/900/1800/1900MHz
Battery life: 96h
Waterproof function: IP67 waterproof
Size: 36.8*36.8mm
Packing included:
1 * Smart pet bell
1 * Collar
1 * Magnetic charging cable
1 * Hanging ring and bell
1 * User Manual
Note:
1. Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting.
2. Due to the light and screen difference, the item's color may be slightly different from the pictures. Please understand.